ANTI SLIP
ANTI-SLIP COATING
ANTIRUSCHBESCHICHTUNG
Reduce the slipperiness of surfaces
Imagine the following situation with your eyes closed: it's spring, you wake up on a beautiful and slightly chilly spring morning. You get out of bed, put on your slippers and, still sleepy, approach the window and raise the blinds. The morning sun immediately breaks into your room, and your gaze falls on the new tiles on your terrace. Satisfied with this start to the day, you make yourself a coffee and intend to drink it on the terrace, with the newspaper and the rays of the spring sun. Everything is going according to plan, you are happy and you can already taste the taste of freshly brewed coffee as you go out onto the terrace. However, the idyll ends there because the ground suddenly gives way under your feet, the coffee spills, and your body is overwhelmed with pain from the impact. Shaken and bruised, you get up with a spasm, sit on a chair, happy that you didn't break anything, and think about how to prevent situations like this.
Later in the day, while surfing the Internet looking for a solution, you come across the M8 SOLUTION website. Intrigued, you browse the menus and find what you need. ANTI SLIP is the ideal solution for you and the cure for unwanted falls and slips.
Made in Croatia, ANTI SLIP is an anti-slip coating used to prevent slippage on hard mineral surfaces such as ceramic tiles, concrete, stone and similar surfaces. Its design and characteristics are fully focused on quality and results and creating maximum satisfied users.
By treating the surfaces, the risk of slipping is eliminated by increasing the coefficient of friction up to 70%. It works best preventing slippage caused by water, while it loses its properties on ice, grease and oils. Since it has no smell or color, the product is suitable for use in outdoor and indoor spaces, depending on the need. The surfaces to which it is applied must be pre-washed and dry in order for the product to achieve maximum results. It is not suitable for use on high-gloss surfaces because there is a risk of forming a matte layer. The product does not change the appearance of the treated surface and is extremely easy and safe to use. It is completely soluble in water and leaves no traces after application.
M8 ANTI SLIP ensures you have a firm foothold during wet and rainy days. Wrap yourself in the safety of the upcoming spring days and be sure that the quality and performance of this product will not disappoint you. ANTI SLIP – the best choice for your safety!
INSTRUCTIONS FOR USE
Before use, shake the product well and test on a small area and in an inconspicuous place. Apply the product to a dry and cleaned surface using a brush or mop. Add product as needed over the course of 30 minutes; the surface must not dry out, it must remain wet at all times. Then rinse with plain water. If the result is not satisfactory, repeat the procedure after the surface has completely dried. After use, wash the tools in plain water.
The product is not suitable for high-gloss ceramic tiles because a matte layer may be created, making them no longer shiny.
ADVANTAGES AND FEATURES
• Increases friction by up to 70%
• Easy to use
• Easy to apply
• Not harmful
• Does not change the appearance of the surface
How does ANTI SLIP work?
