Before use, shake the product well and test on a small area and in a less visible place. The product should be applied evenly to a previously cleaned and dry surface. The product may be applied if the surface temperature is between 5°C and 30°C. For best results, the product should be applied UNDILUTED and in two layers dry on dry (make sure that the first layer is completely dry before applying the second layer). The product can be applied with a sprayer, roller, brush or poured directly onto the desired surface. It is necessary to leave the product to absorb into the treated surface and dry completely. The best results are visible after 24 hours. Depending on the desired effect, the product can be diluted with water in certain situations, but it should be kept in mind that each dilution reduces the effectiveness of the product. The possible dilution ratio is up to 1:5 for stone surfaces.
Protect 500 Stone impregnation 500ml
PROTECT 500 STONE IMPREGNATION M8 is an impregnation for hard floor and wall surfaces, facades, stone based on siloxane, which is used to prevent the formation of dirt and stains and to facilitate the cleaning of surfaces. PROTECT 500 impregnation is used for: stone, concrete, brick, plaster, clay,
roof tiles, cement, ceramic tiles, terracotta, etc. It acts as a preventative against the formation of algae and mold, repels water, oil and other atmospheric contaminants. It does not change the appearance of the surface, does not leave a visible mark on the surface, is vapor permeable and allows the surface to “breathe”. Surface coverage is 8-10m2/1l (depending on absorbency).
ADVANTAGES AND FEATURES
• Great power to repel impurities from the treated surface
• Slows down the surface “aging” process
• Easy to use
• Easy to apply
• Can also be used in well-ventilated interiors
Related products
Anti Slip Coating 5L
ANTI-SLIP COATING M8 is used to prevent slippage on hard mineral surfaces such as ceramic tiles, concrete, stone, etc. The anti-slip coating works by increasing friction on hard mineral surfaces. It is suitable for use in interiors and exteriors. After applying the anti-slip coating, surfaces are easier to maintain. It works best by preventing slippage caused by water, while on ice, grease and oils it loses its anti-slip properties. The product is not suitable for high-gloss ceramic tiles because a matte layer can be created, so they will no longer be shiny. ADVANTAGES AND CHARACTERISTICS • Increases friction by up to 70% • Easy to use • Easy to apply • Non-harmful • Does not change the appearance of the surface
HRC Grill 5L
It is a superior product for cleaning and degreasing grills, grill plates, range hoods, ovens and other surfaces where food is prepared. This special product is extremely effective in removing grease, burnt food residue and stubborn dirt from various surfaces, providing superior cleaning results.
Glass & Ceramic Protect 500ml
GLASS & CERAMIC PROTECT M8+ is an impregnation and protection based on silane nano particles used to protect glass, ceramic and other smooth surfaces. It acts preventively in protecting and preserving the treated surface as best as possible. It prevents and easily removes new stains. It is used for easier removal of scale from glass surfaces. In the winter months, it helps to remove ice from the windshield (ice is removed without using a scraper). ADVANTAGES AND CHARACTERISTICS • Great ability to repel dirt from ceramic surfaces • Easy to use • Simple to apply • Can be used in well-ventilated interiors
Anti Slip Coating 1L
ANTI-SLIP COATING M8 It is used to prevent slippage on hard mineral surfaces such as ceramic tiles, concrete, stone, etc. The anti-slip coating works by increasing friction on hard mineral surfaces. It is suitable for use in interiors and exteriors. After applying the anti-slip coating, surfaces are easier to maintain. It works best by preventing slippage caused by water, while on ice, grease and oils it loses its anti-slip properties. The product is not suitable for high-gloss ceramic tiles because a matte layer can be created, so they will no longer be shiny.
ADVANTAGES AND FEATURES
• Increases friction by up to 70% • Easy to use • Simple to apply • Non-harmful • Does not change the appearance of the surface
Surface Nano Protect+ 5L
SURFACE NANO PROTECT M8+ is a “heavy duty” agent based on silane particles that is used for impregnation and protection of various porous and non-porous surfaces such as stone and wood. Due to its reinforced formula, it is extremely effective. The agent acts preventively in protecting and preserving the treated surface as best as possible. SURFACE NANO PROTECT+ is an agent that does not change the appearance of the surface, does not leave a visible mark on the surface, is vapor-permeable and allows the surface to “breathe”. SURFACE NANO PROTECT+ acts preventively in preventing the formation of deep dirt, the penetration of algae and mold on hard and stone surfaces, repels water and various other greasy dirt and accelerates the removal of dirt. ADVANTAGES AND CHARACTERISTICS • Great power to repel dirt from the treated surface • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
R 800 Cleaner 1L
CLEANER R800 is a product used to clean rust stains from hard surfaces such as stone, metal, ceramic tiles. Coverage from 8 to 20 m2/1L, depending on the absorbency of the surface. ADVANTAGES AND CHARACTERISTICS: • Removes traces of rust from stone, metal and ceramic tiles • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
Textile Protect+ 5L
TEXTILE PROTECT M8+ is used for impregnation and protection of textile surfaces. It works on the basis of an emulsion of silane particles, preventively protecting and preserving the treated surface as best as possible. It prevents the penetration of liquids and allows for easier removal of newly formed stains. It is used for protection and impregnation of textiles from oil, ketchup and other greasy stains, textile sofas, carpets, tablecloths, awnings, tents, mattresses, work clothes, shoes, aprons, car seats and many others. ADVANTAGES AND CHARACTERISTICS • Great power of repelling dirt from the treated surface • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
Glass & Ceramic Protect 5L
GLASS & CERAMIC PROTECT M8+ is an impregnation and protection based on silane nano particles used to protect glass, ceramic and other smooth surfaces. It acts preventively in protecting and preserving the treated surface as best as possible. It prevents and easily removes new stains. It is used for easier removal of scale from glass surfaces. In the winter months, it helps to remove ice from the windshield (ice is removed without using a scraper). ADVANTAGES AND CHARACTERISTICS • Great ability to repel dirt from ceramic surfaces • Easy to use • Simple to apply • Can be used in well-ventilated interiors
