Before use, shake the product well and test on a small area and in a less visible place. GLASS: The product should be applied evenly to the desired previously cleaned and dry surface with a spray bottle (sprayer) and rub the product into the surface in a circular motion with a clean cotton cloth (it must not dry without rubbing). Rub for as long as necessary and replace wet with dry cloths as necessary until the last trace of the product on the surface is removed (the surface must remain free of drops). Instead of rubbing by hand, a polisher with a low speed can be used, taking care not to damage the surface. CERAMICS: The same procedure as when applying to glass, except that it is recommended to use a cloth soaked in the product for application, after which the surface is wiped with a dry cloth. Pay attention to applying a thin layer to ceramic tiles and not leaving the product on the surface without rubbing, as this may cause stains.
Glass & Ceramic Protect 5L
GLASS & CERAMIC PROTECT M8+ is an impregnation and protection based on nano silane particles used to protect glass, ceramic and other smooth surfaces. It acts preventively in protecting and preserving the treated surface as best as possible. It prevents and easily removes new stains. It is used for easier removal of scale from glass surfaces. In the winter months, it helps to remove ice from the windshield (ice is removed without using a scraper).
ADVANTAGES AND FEATURES
• Great power to repel dirt from ceramic surfaces
• Easy to use
• Easy to apply
• Can also be used in well-ventilated interiors
Related products
Anti Slip Coating 5L
ANTI-SLIP COATING M8 is used to prevent slippage on hard mineral surfaces such as ceramic tiles, concrete, stone, etc. The anti-slip coating works by increasing friction on hard mineral surfaces. It is suitable for use in interiors and exteriors. After applying the anti-slip coating, surfaces are easier to maintain. It works best by preventing slippage caused by water, while on ice, grease and oils it loses its anti-slip properties. The product is not suitable for high-gloss ceramic tiles because a matte layer can be created, so they will no longer be shiny. ADVANTAGES AND CHARACTERISTICS • Increases friction by up to 70% • Easy to use • Easy to apply • Non-harmful • Does not change the appearance of the surface
Cleaner C 200 1L
CLEANER C200 is a superior means for removing impurities caused by cement, concrete, saltpetre (salts) and for efflorescence of hard surfaces, as well as scale deposits. This versatile cleaner offers outstanding results on stone, brick, concrete, grout, and tile adhesives and other hard surfaces.
ADVANTAGES AND FEATURES:
- Suitable for stone, brick, concrete, grout and ceramic tiles
- Works in just 3 minutes
- Safe for indoor use
- Easy to use
Graffiti Remover Universal 5L
GRAFFITI REMOVER UNIVERSAL is a universal product for removing graffiti and paint from smooth and porous surfaces such as metal, mineral and other surfaces. Due to its neutral odor, it can be used for interior and exterior surfaces. Coverage 5-20 m²/l (depending on the absorbency of the surface). ADVANTAGES AND CHARACTERISTICS: • High power to remove graffiti and paint from walls • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
Protect 500 Stone impregnation 500ml
PROTECT 500 STONE IMPREGNATION M8 is a siloxane-based impregnation for hard floor and wall surfaces, facades, stone, which is used to prevent the formation of dirt and stains and to facilitate cleaning of surfaces. PROTECT 500 impregnation is used for: stone, concrete, brick, plaster, clay, roof tiles, cement, ceramic tiles, terracotta, etc. It acts preventively in preventing the formation of algae and mold, repels water, oil and other atmospheric dirt. It does not change the appearance of the surface, does not leave a visible mark on the surface, is vapor-permeable and allows the surface to "breathe". Surface coverage is 8-10m2/1l (depending on absorbency). ADVANTAGES AND CHARACTERISTICS • Great power to repel dirt from the treated surface • Slows down the process of "aging" of the surface • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
R 800 Cleaner 1L
CLEANER R800 is a product used to clean rust stains from hard surfaces such as stone, metal, ceramic tiles. Coverage from 8 to 20 m2/1L, depending on the absorbency of the surface. ADVANTAGES AND CHARACTERISTICS: • Removes traces of rust from stone, metal and ceramic tiles • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
HRC Grill 1L
It is a superior product for cleaning and degreasing grills, grill plates, range hoods, ovens and other surfaces where food is prepared. This special product is extremely effective in removing grease, burnt food residue and stubborn dirt from various surfaces, providing superior cleaning results.
Degreaser 800 5L
DEGREASER 800 Powerful cleaner for cleaning and removing oil deposits, atmospheric and other impurities from heavily soiled industrial surfaces and facilities. Used for washing and degreasing metal surfaces, old ingrained dirt, cleaning tarpaulins, engine parts, pre-washing machines and other machinery, cleaning stone surfaces, concrete surfaces, ceramic tiles. ADVANTAGES AND CHARACTERISTICS
- Great cleaning power for oily stains
- Easy to use
- It is easy to apply.
- Can also be used in well-ventilated interiors
R 800 Cleaner 5L
CLEANER R800 is a product used to clean rust stains from hard surfaces such as stone, metal, ceramic tiles. Coverage from 8 to 20 m2/1L, depending on the absorbency of the surface. ADVANTAGES AND CHARACTERISTICS: • Removes traces of rust from stone, metal and ceramic tiles • Easy to use • Easy to apply • Can also be used in well-ventilated interiors
